
Welcome to our used electric hoist page. We stock used chain & used wire rope hoists. We also stock used cranes or we can build overhead cranes using hoists on this page and end carriages.
01527 854 600.
| HELP| |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG33 | 125kg | GIS picture | GCH 250 1NF | 3 mts of chain drop | Almost new G.I.S. ECH, with eye suspension, picture. |
| AG125-2 | 125kg | DEMAG | DKUN-1-125K
V1 F4
Year of manufacture 2001 SWL 125kg Speed 8 & 2m per min lift speed. |
3 mts | eye suspension |
AG70-4 |
250kg | Demag chain hoist never used, still boxed. | Demag DKUN 2-250 KV1 | 3 mts TBC | more hoist details |
| AG56 | 250kg | Morris | S3 chain hoist | 3m of chain lift | photo |
| AG47 | 250 kgs | YALE | 415 volts three phase hoist | HOL 3.2 meters | 2 speed lifting |
| AG110 | 250kgs | Stahl | T202 Chain drop 6.5mts, flange width max 150mm. |
![]() |
Ultra low headroom electric chain hoist. Stahl, T202, 230mm headroom loss from power trolley wheels to hook. |
| AG17 | 250kgs | used jib crane | Swing jib | 3.2 | 250KG SWL used swing jib. We have six available. 4.15metres overall height, jib arm is slightly lower. Jib arm length 3.2 metres. Overall height 4130mm, height to under side of the arm 3000mm Picture and base sizes. |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG500 | 1/2 ton | Abus | chain hoist | 3 meters of chain lift | details |
AG70-1
|
500kg | Demag chain hoists never used, still boxed, we have 1 left. | Demag DKUN 2-250 KV2 | 3 mts TBC | more hoist details |
| AG48 | 500 kilos | TBA | wall mounted jib arm | 2 meters | With or without a hoist. Picture |
| AG49 | 500kgs | Morris 3 -phase | electric hoist | n/a | more details to follow |
| AG29 | 500kgs | Stahl | T202 |
![]() |
Ultra low headroom electric chain hoist. Stahl, T202 with KUE powered trolley. 285mm headroom loss from hoist trolley wheels to hook bowl. Picture |
| AG12 | 0.5t | Demag Jib crane | used jib crane | 4.5 meter jib arm | Overall height 5830mm swing arm 4.55 meters. Comes fitted with a single speed Demag hoist. Removed due to factory move. Excellent working order. Picture |
| AG25 | 500 kgs | Stahl | T202 | 3 mts HOL | c/s push travel trolley, 8/2 meters a minute lifting speed. Picture |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG123 | 1 tonne | Demag DH hoist | DH electric rope hoist. | 8 meters of rope drop | ![]() |
| AB16 | 1 tonne | Morris
420N 1t, at M5 duty or 1.6t at M4 duty 2 Fall, fixed suspension, 50v control 415 volt 3 phase, M5 13.85m HOL (height of lift) |
stationary wire rope hoist | lift 13.85 mts HOL Speeds are 10/2.5mpm. |
Morris 1t units on 2 falls with an M5 duty. Also 1.6t on 2 falls but would then be M4 duty. All rope hoists are identical; units 16 in stock. |
| AG1000 | 1000kgs | Abus | chain hoist | 3 mts lift | details |
| AG10 | 1000 kgs | Stahl | T405, ideal for galv plants. |
N/A | 2 speed all motions, c/w power travel trolley |
| AG72 | 1t SWL | SWF ECH's 2 off. | electric chain hoists, 2 off. | electric drive trolley | 20 meters drop of chain |
| AG22 | 1 tonne | Liftket | hoist | 3.5 metres HOL | 3 phase 1 tonne SWL Liftket electric 415 volt chain hoist, eye suspension. Unused, three phase 415 volts. Picture |
| AB16 | 1.6 tonne | Morris
420N 1.6t at M4 duty 2 Fall, fixed suspension, 50v control 415v three phase. |
stationary wire rope hoist | lift 13.85 mts HOL Speeds are 10/2.5mpm. |
Morris 420 N, 1.6tonne on 2 falls at M4 duty.
|
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG141 | 2 tonne | Morris | electric lifting hoist | 3 meters of chain drop | with power travel trolley. |
| AG10 | 2000 kgs | Stahl chain hoist | T510 heavy duty tough hoists. |
N/A | 2 speed lifting and cross travel |
| AG27 | 2000 kilos | Sealey | manual chain block | 3 meters | Hand operated chain block 2000kgs, with hook suspension. As new. |
| AB16 | 3.2 tonne | Morris 420N 3.2 tons on 4 falls, fixed suspension, 50v control 415v three phase. | static wire rope hoist | Hook lift 6.5 mts HOL Speeds are 5/1.25mpm. |
Morris 420 N, 3.2 tonnes on 4 rope falls. |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG82 | 5t | Street | ZX6 | height of lift 6.5 meters on four fall on rope | details |
| AG95 | 5 tons | Street new rope hoist, type ZX34 |
Hoist speed
4/1.3m/min (M4) Cross travel 20/5m/min (M5) |
n/a | 6.5 meter of rope drop. Trolley set to fit 229mm or 305mm |
| AG14 |
5
tonne |
hoist
unit only |
double
girder crab; gauge 1225 mm |
Kone
5 tonne x 10m hol crab unit x 1225mm gauge dual speed hoisting Single
speed travel. |
|
| AG13 | 10 tonnes | SWF Kone | monorail hoist unit. | 6 mts drop | details |
| AB5 | 10 tonne | Demag P hoist | Crab unit for a double girder crane. | N/A | good condition |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG20 | 15 tonnes | Stahl wire rope hoist unit | Only 115 hours use. Very clean unit. M5 duty, IP55 | N/A | AS5040-16 4/1 20 metres height of lift, 4/1 L4. Lifting speed 4/1, 20/5 traverse speeds. |
Used electric HOISTS WANTED call 01527 854 600 for details.
used hoists from factory clearances